•
"1010 Battery pack" on page 58
•
"1040 Bottom slot cover" on page 61
Removal steps of PCI Express Mini Card for wireless LAN
In step
1
, unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159) or pick the
connectors with your fingers and gently unplug them in the direction of the arrow.
Note: Some models might have a third white antenna cable.
Note: Your models may look slightly different from the illustration above.
Step
Screw (quantity)
2
M2 × 3 mm, wafer-head, nylon-coated (1)
When installing: Plug the gray cable into the jack marked MAIN or M, and the black cable into the jack
marked AUX or A on the card.
Color
Torque
Black
0.181 Nm
(1.85 kgfcm)
.
Chapter 8
Removing and replacing a FRU
65