Deleting A Community Ip Address - HP XP20000/XP24000 Reference Manual

NOTE:
If the values for an IP address are all set to zero (0), that address cannot be specified for
Ipv4 and Ipv6.
The Add IP Address dialog box does not support shortened expression for Ipv6 address.
Enter 8 hexadecimal numbers that are separated colons (:) to a maximum 4 digits from
zero (0) to FFFF inclusive.
When the OS of the SVP is Windows XP, if you enter an Ipv6 address and select Apply,
an error message is displayed and the Ipv6 address cannot be set.
5. Select OK. The new IP address displays in Community & Trap, but the change is not yet
implemented.
6. Select Apply. Select OK or Cancel.
Figure 12 Add IP Address Menu
Figure 13 IP Address dialog box

Deleting a Community IP Address

To delete a community IP address:
1. Change to Modify mode.
2. Log on to Remote Web Console. Click Go – Environmental Settings – SNMP Information in the
menu bar of Remote Web Console Main window. The SNMP Information window is displayed
(see "SNMP Information Tab" (page
3. Select SNMP Information.
4. In Community & Trap, select the unwanted community IP address. Right-click to display Delete
IP Address menu (see
11)).
"Delete Community IP Address Menu" (page 20)).
Deleting a Community IP Address 19