Execution Results - HP XP20000/XP24000 User Manual

Table 34 Parameters of the SerialNumber Tag
Column in the
Spreadsheet
A

Execution Results

The execution results of the CFL Extension commands are exported to the following area in the
output file:
After the semicolon on each row
The row below the row where an error occurred
Table 35 (page 130)
Table 35 Exported Contents of the Execution Results
Row
Declaration
Parameter
(xxxx-yyyyy) indicates part codes and error codes. For details about these codes, see the HP
StorageWorks XP24000/XP20000 Remote Web Console Error Codes.
Examples of execution results are as follows:
Case 1: An operation tag has an error.
The following example shows execution results when an operation tag has an error. To identify
where an error occurred, find the row above the row that begins with the #^ characters. In
this example, an error occurred in the SuspendPair tag.
#!Version 05_02_01,CFL_RemoteCopyJournalMF,PairOperation,;Error(6505-66004)
[SerialNumber]
64040,;Check OK
[Suspend-Pair]
#^,;Check NG(6505-66004)
00,04,40,01,P-VOL,00,64040,Group,Disable,Flush,;
Case 2: A parameter has an error.
The following example shows execution results when a parameter has an error. To identify
where an error occurred, find all the rows that display an error after the semicolon. In this
example, errors occurred on the first and fourth row in the SuspendPair tag.
#!Version 05_02_01,CFL_RemoteCopyJournalMF,PairOperation,;Warning(1305-66578)
[SerialNumber]
64040,;Normal end
[SuspendPair]
00,04,40,01,P-VOL,00,64041,Volume,Disable,Flush,;Error(6505-58075)
00,04,41,01,P-VOL,00,64040,Volume,Disable,Flush,;Normal end
130 Using the CFL Extension
Parameter
SerialNumber
describes the exported contents.
Description
Indicates the overall result of the
spreadsheet.
Indicates the result of the line with a
parameter.
Setting Range of Values
Serial number of the 00000 to 99999
storage system
Exported Content
Normal end: Finished normally.
Warning(xxxx-yyyyy): Errors occurred on some rows.
Error(xxxx-yyyyy): Errors occurred on every row.
For the CFLCHK command:
Check OK: Finished normally.
Check NG(xxxx-yyyyy): An error occurred on this row.
For the CFLGET or CFLSET command:
Normal end: Finished normally.
Error(xxxx-yyyyy): An error occurred on this row.
Number of Characters
5 or fewer decimal
digits