Statistics Group
Connectivity Unit Port Statistics Hub Table
connUnitPortStatHubTable
Syntax
Access
168
The value is stored as an ASCII value. The following is the current value
of this object.
0 = "0"
1 = "2"
2 = "2"
3 = "0"
This defines a revision of 02.20.
Set to 0220.
Note
Following is a statistics table for each port type class. Port types are
aggregated into a port type class, such as all the fabric port types. There is
one statistics table for each port. For all objects in statistics tables, if the
object is not supported by the conn unit the high-order bit is set to 1 with all
other bits set to 0. The high-order bit is reserved to indicate whether the
object is supported. All objects start at a value of 0 at hardware
initialization, and continue incrementing until the end of 63 bits and then
wrap to 0.
The HP FC 6164 does not support Hub statistics; this section is not
Note
applicable.
Sequence of connUnitPortStatHubEntry
Not accessible
MIB Reference Manual