Rollbacksnapshot; Rundiagnostic - HP StoreVirtual 4000 User Manual

Example
cliq resetSession volumeName=MyVolume login=10.1.2.3 userName=admin
passWord=secret
cliq resetSession volumeName=MyVolume

rollbackSnapshot

This command rolls back a snapshot. WARNING: The rollbackSnapshot command will replace the original
volume with a new one based on the contents of the snapshot and delete any snapshots created after the
snapshot which is being rolled back.
Availability: Windows, SAN/iQ
Version: 8.0
Warnings
If the original volume is specified, this will replace it with a new volume based on the contents
of the snapshot and delete any snapshots created after the snapshot being rolled back.
Request Syntax
cliq rollbackSnapshot snapshotName= login= userName= passWord=
userName
passWord
groupName
snapshotName
description
Example
cliq rollbackSnapshot snapshotName=TheSnapshot login=10.0.1.2
userName=admin passWord=secret
cliq rollbackSnapshot snapshotName=TheSnapshot

runDiagnostic

This command runs one or all storage system diagnostics.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq runDiagnostic login= userName= passWord= diagnosticName=
88 | HP Lefthand CLI | Commands
login Required The IP addresses or DNS-resolvable names of one or more storage
systems
Conditional The authentication user name for the storage system. (Parameters
userName/passWord or groupName must be specified).
Conditional The password for the storage system. (Parameters userName/passWord
or groupName must be specified).
Conditional The name of the management group with cached credentials.
(Parameters userName/passWord or groupName must be specified).
Required The name of the remote snapshot
Optional Optional description