Waitforupdate - HP StoreVirtual 4000 User Manual

userName
passWord
groupName
receivePort
timetowait
Example
cliq waitForEvent login=10.0.1.2 userName=admin passWord=secret
cliq waitForEvent

waitForUpdate

This command will block on a change to the state in the management group.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq waitForUpdate login= userName= passWord=
userName
passWord
groupName
receivePort
timetowait
Example
cliq waitForUpdate login=10.1.2.3 userName=admin passWord=secret
cliq waitForUpdate
102 | HP Lefthand CLI | Commands
login Required The IP addresses or DNS-resolvable names of one or more storage
systems
Conditional The authentication user name for the storage system. (Parameters
userName/passWord or groupName must be specified).
Conditional The password for the storage system. (Parameters userName/passWord
or groupName must be specified).
Conditional The name of the management group with cached credentials.
(Parameters userName/passWord or groupName must be specified).
Optional The TCP port to receive the discovery packets (defaults to an unused
port if unspecified)
Optional The maximum amount of time to wait before timing out.
login Required The IP addresses or DNS-resolvable names of one or more storage
systems
Conditional The authentication user name for the storage system. (Parameters
userName/passWord or groupName must be specified).
Conditional The password for the storage system. (Parameters userName/passWord
or groupName must be specified).
Conditional The name of the management group with cached credentials.
(Parameters userName/passWord or groupName must be specified).
Optional The TCP port to receive the discovery packets (defaults to an unused
port if unspecified)
Optional The maximum amount of time to wait before timing out.