Waitforevent - HP StoreVirtual 4000 User Manual

Version: 8.0
Request Syntax
cliq vssSnapshot volumeName=
volumeName
persistent
transportable
backupDoc
writerInfo
shadowInfo
deleteShadowCopies
excludeWriters
includeWriters
runCommand
importShadow
mountShadow
breakShadowCopies
maskLun
snapshotName
userName
passWord
description
Example
cliq vssSnapshot

waitForEvent

This command waits for an alert or event message.
Availability: Windows, SAN/iQ
Version: 9.0
Request Syntax
cliq waitForEvent login= userName= passWord=
Optional The name of the volume
Optional Is the snapshot persistent? This can be one of: 0, 1 - default
Optional Is the snapshot transportable? This can be one of: 0 - default, 1
Optional The name of the backup document file
Optional Display information about VSS writers. This can be one of: status - writer
status, metadataSummary - summary of the VSS writers, metadataDetail -
detailed information on the VSS writers
Optional Display information about VSS shadow copies. This can be one of: all
- show information on all shadow copies, <shadow Set GUID> - show
information on shadow copies belonging to this shadow set, <shadow
Copy GUID> - show information on this shadow copy
Optional Delete VSS shadow copies. This can be one of: all - delete all shadow
copies, <volume> - delete the oldest shadow copy of this volume,
<shadow Set GUID> - delete all shadow copies in this shadow set,
<shadow Copy GUID> - delete the shadow copy with this id
Optional List of writer GUIDs to exclude from the shadow copy
Optional List of writer GUIDs to include in the shadow copy - if the writer is found
to not participate in the snapshot, no snapshot will be taken
Optional Custom command executed after shadow creation, import or between
break and make-it-write
Optional Transportable VSS snapshot import
Optional Expose the shadow copy as a mount point or drive letter - the format of
this is mountShadow="<GUID>;<mountOrDrive>"
Optional Break the shadow copy set
Optional Mask the shadow copy LUN from the host. It works in conjunction with
breakShadowCopies and is valid only when breakShadowCopies is
specified (Windows 2008 only).
Optional The name of the remote snapshot
Conditional The authentication user name for the storage system. (Parameters
userName/passWord or groupName must be specified).
Conditional The password for the storage system. (Parameters userName/passWord
or groupName must be specified).
Optional Optional description
HP Lefthand CLI | Commands | 101