Hardware Add Storage - HP StoreOnce B6000 Series Reference Manual

hardware add storage

Description of Command Function
This command adds storage which has been discovered using the hardware discover storage
command (see
newly discovered storage must exist as presented in the system show status command (see
"system show status" (page
(XXTB)" where XX cannot be equal to zero. The discovery process must be complete; no storage
set can have the status of "discovering." Once the storage addition process has been successfully
started, the system show status command is used to determine the status and completion of
the process.
Command Syntax
hardware add storage
Command Authority
Administrator
Command Object Requirements
Not applicable – no objects exist within this command.
Command Parameter Requirements
Not applicable – no parameters exist within this command.
Requirements for Command Execution
The command entry must conform to the command syntax.
Storage discover must be complete.
Each storage enclosure must contain 12 drives all of the same capacity.
Successful Command Output
Upon successful completion of the command, the following is displayed:
storage addition successfully started
Command Operation during Abnormal Conditions
1. If the command does not conform to the required syntax, the following is displayed:
Command Failed - the command does not conform to the required syntax,
SYNTAX, where SYNTAX is the command syntax as described under Command Syntax in this
section.
2. If newly discovered storage does not exist, the following is displayed:
Command Failed
to D2D system and execute the "hardware discover storage" command
3. If the storage discovery process in currently being executed, the following message is displayed:
Command Failed
Example
# hardware add storage
storage addition successfully started
"hardware discover storage" (page
66)). At least one storage set must exist with a status of "discovered
New storage does not exist. Add physical storage
Storage discover already in process
21)). Before this command can be executed,
hardware add storage 19