Ericsson 4422 User Manual page 19

BusinessPhone – Ericsson Dialog 4422 IP Office
Continued startup procedure
The display shows:
Use administrator mode
to change IP settings (x)
The x indicates a timer counting down seconds. If no key is
pressed during this time, "no change" is selected automatically.
Note: You can speed up the procedure by pressing the
Speaker key.
The administrator mode is used to change the IP settings in
your phone. This mode is reserved for your system
administrator.
The display now indicates that the phone is connecting to the
server and the software is loading. This takes about 1 minute. After
a self test, the phone is ready for use or ready for log on. To log on,
see section "Log on" on page 21
Start the Phone – Log On/Off
19