Canon PIXMA MG6320 Online Manual page 258

Disc Label: -0.2 inch (-5.0 mm) to +0.2 inch (+5.0 mm)
Vertical
You can adjust the print position in the vertical direction.
Set a positive value to move upward or set a negative value to move downward.
Horizontal
You can adjust the print position in the horizontal direction.
Set a positive value to move left or set a negative value to move right.
Advanced Settings
Image Correction
Select Enable Auto Photo Fix to apply corrections automatically; select No correction if you do
not want to do so. Select Enable Auto Photo Fix to set the following.
Enable Red-Eye Correction
Select this checkbox to correct red eyes caused by a camera flash.
Prioritize Exif info
Select this checkbox to apply corrections primarily based on the settings made at the time of
shooting.
Important
The color tone may change when you print a document image with Enable Auto Photo Fix
selected. In that case, select No correction.
Print Quality
You can select the print quality suitable for the data to be printed.
You can select Auto, High, Standard, Fast, or Custom. Select Custom to display a slider with
which you can set the print quality in five levels. Move the slider to the right to improve the quality
and left to increase the print speed.
Duplex Printing Setting
This appears when you select a printer and media type that support duplex printing. Select this
checkbox to print on both sides of the paper.
Print with auto duplex printing
For printers that support automatic duplex printing, Print with auto duplex printing
appears when you select the Duplex Printing Setting checkbox. Select this checkbox to
turn over the paper to the back or front side automatically.
Print
Starts printing with the specified settings.