Canon PIXMA MG6320 Online Manual page 257

Position
You can select the position to print the date.
The print position of the date does not change even if images are rotated.
Font Size
You can select the size of the date.
Font Color
You can set the color of the date.
The Color dialog box appears. Select the color you want to set, then click OK.
Note
The date is the image shooting date recorded as Exif data. If there is no Exif data, the
date and time of last update to the image file will be printed.
Borderless Printing Settings
Print on full page without borders
Select this checkbox to print the image on an entire sheet of paper without borders.
Note
You can also set in Borderless of the print preview area.
Amount of Extension
Select the amount of extension from None, Small, Medium, Large, and Standard.
Large
The solid lines represent the paper size, and the translucent areas represent the amount of
extension.
Important
When Amount of Extension is set to Large, the back of paper may become stained.
When Amount of Extension is set to Small or None, margins may appear depending
on the size of the paper.
Adjust Print Position
If the image on the printed sticker or disc label is out of position, you can adjust the print position. You
can adjust the print position in 0.01 inch or 0.1 mm increments within the following ranges.
Stickers: -0.08 inch (-2.0 mm) to +0.08 inch (+2.0 mm)
(Color Setting)
Medium Small