3-4. Verification Items
(1) Service test print
<EEPROM information contents>
On the service test print (sample below), confirm the EEPROM information as shown below. (The
information is given in the upper portion of the printout.)
iP5200: Model name
US: Destination
Vx.xx: ROM version
USB (xxxxxx): USB serial number
FA = xx xx xx: Reserved for plant use
D = xxx.x: Waste ink amount (%)
CDR (+xxxxx, +yyyyy): CD / DVD sensor position correction value
LF = (x): LF correction value
AB (K = OK
<Print check items>
On the service test print (sample below), confirm the following items:
- Check 1,
- Check 2,
- Check 3,
- Check 4,
streaks or unevenness.
- Check 5,
- Check 6,
There shall be no remarkable unevenness.
- Check 7,
There shall be no remarkable unevenness.
- Check 8,
shall be OK.
<Service test print sample>
Y = OK ...): Ink system check result
top of form accuracy: The lines shall not extend off the paper.
EEPROM information
nozzle check pattern: Ink shall be ejected from all nozzles.
check pattern for uneven printing due to line feeding: There shall be no remarkable
LF correction pattern: There should be no white line and black line.
check pattern for uneven printing due to carriage movement (9600 dpi mode):
check pattern for uneven printing due to carriage movement (standard mode):
CD / DVD sensor and automatic print head alignment sensor correction: The results
1-30