Lexmark X860 Quick Reference page 12

4
Raise the sheet guard.
5
Turn the paper advance wheel to the left to remove any
jammed pages.
6
Close the ADF cover.
7
Open the scanner cover, and remove any jammed pages.
8
Close the scanner cover.
9
Touch Continue.
293 paper jam
The printer was sent a scan job, but found no original document
in the ADF. Try one or more of the following:
Touch Continue if no scan job is active when the message
•
appears. This clears the message.
Touch Cancel Job if a scan job is processing when the message
•
appears. This cancels the job and clears the message.
Touch Scan from Automatic Document Feeder if the page
•
jam recovery is active. Scanning resumes from the ADF
immediately after the last successfully scanned page.
Touch Scan from flatbed if page jam recovery is active.
•
Scanning resumes from the scanner glass immediately after
the last successfully scanned page.
Touch Finish job without further scanning if page jam
•
recovery is active. The job ends at the last successfully scanned
page, but the job is not canceled. Successfully scanned pages
go to their destination: copy, fax, e-mail, or FTP.
Touch Restart job if job recovery is active and the job is
•
restartable. The message clears. A new scan job containing the
same parameters as the previous job starts.
12