Installing The Pcie Card Holder; Expansion Cards; Expansion Card Installation Guidelines - Dell PowerEdge T620 Owner's Manual

Owner's manual
Hide thumbs Also See for PowerEdge T620:
Table of Contents

Advertisement

Figure 24. Removing and Installing the PCIe Card Holder
1. tab
2. PCIe card holder

Installing The PCIe Card Holder

CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
1.
Turn off the system, including any attached peripherals, and disconnect the system from its electrical outlet.
2.
Open the system.
3.
Align the PCIe card holder with the projection on the chassis and push it down until firmly seated.
4.
Close the system.
5.
Place the system upright and on its feet on a flat, stable surface.
6.
Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

Expansion Cards

Expansion Card Installation Guidelines

Table 3. Supported PCI Express Generation 3 Expansion Cards
PCIe Slot
Processor Connection
1
Processor 1
2
Processor 1
Height
Length
Standard Height
Full Length
Standard Height
Full Length
Link Width
Slot Width
x8
x8
x16
x16
61

Advertisement

Table of Contents
loading

Table of Contents