Table of Contents
Advertisement
4036-501
7.
8.
9.
10.
11.
12.
13.
14.
15.
Disconnect the sensor connector (P/J25).
Disconnect the motor connector (P/J27).
Disconnect the clutch connector (P/J18).
Release all harnesses from the clamps on the DADF registration roll drive motor
assembly.
Remove three (3) screws from the DADF assembly to the DADF registration roll
drive motor assembly.
Remove the DADF registration roll drive motor assembly.
Remove the E-ring.
Remove the (DADF #2) gear.
Remove the (DADF #1) gear.
DADF Repair Procedures
4-27
Advertisement
Table of Contents
