Table of Contents
Advertisement
4036-501
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
4-70
Service Manual
Engage the cable assembly-scan, rear to the pulley-idler.
Engage the pulley on the right side of the half rate carriage.
Engage the spring-exit and auxiliary part of the cable assembly-scan, rear to the
hook on the frame.
Secure the cable assembly-scan, rear to the full rate carriage.
Peel off the gum tape used.
Adjust the position and parallelism of the full rate carriage and half rate carriage.
Move the full rate carriage to check for smooth motion.
Mount the DADF platen glass.
Mount the cover assembly.
Mount the flatbed center platen glass plate.
Mount the user interface.
Mount the DADF assembly.
Advertisement
Table of Contents
