Table of Contents
Advertisement
15.
Remove the display panel (2) from the display enclosure. The display panel is available using the
spare part number 641663-001.
Reverse this procedure to install the display panel.
16.
To replace the display hinges, remove the two Phillips PM 3.0 x 2.0 screws (1) that secure each
hinge to the display panel.
17.
Remove the display hinges (2) from the display panel. The display hinges are available using
spare part number 639511-001.
Reverse this procedure to install the display hinges.
18.
To replace the wireless antenna transceivers, lift up on the silver transceiver (1), and then release
the adhesive material from the display cover.
Component replacement procedures
55
Advertisement
Table of Contents
