Setting The Time And Date - Ericsson BS260 User Manual

Time:
02:12:45
Date:
1998-06-01
22 Getting started

SETTING THE TIME AND DATE

The base station contains a built-in clock for the time and date. The handset
shows this time and date on the standby display when the time and date have
been set.
Please note that the procedure assumes that you are going to select the
option. After you have entered your PIN code, you have to go to the
option via the Time&Date
To set the time:
Route: BaseStation » Settings » Basic » Time&Date » SetTime
1. Select Basic and press
is displayed.
PIN:
2. Enter the PIN code for the base station (see page 78) and press
3. Select SetTime and press
The current time is displayed in hours, minutes and seconds.
4. Enter the time (
U P
5. Press to confirm.
Y E S
The base station time has now been set.
Other handsets connected to the base station automatically show the new time.
To set the date:
Route: BaseStation » Settings » Basic » Time&Date » SetDate
1. Select Basic and press
is displayed.
PIN:
2. Enter the PIN code for the base station (see page 78) and press
3. Select SetDate and press
The current date is displayed in years, months and days.
4. Enter the date (
U P
5. Press to confirm.
Y E S
The base station date has now been set.
Other handsets connected to the base station automatically show the new date.
menu.
.
Y E S
.
Y E S
= move left;
D O W N
.
Y E S
.
Y E S
= move left;
D OW N
= move right).
= move right).
Basic
SetTime
.
Y E S
.
Y E S