Ericsson T28s User Manual page 94

5. Enter a phone number including the area code (for example, your home
number) and press
A number you used before may be suggested to you. If so, press
choose the number, or enter another number.
6. The message Automatic activation on?
The message Profile: Home
You can also make these settings later, if you wish. In this case, you need to
add the desktop charger to the Home profile, or another profile. See "To add
an accessory to a profile" on page 97. You may set the divert number in the
Edit Profile sub-menu, where all profile settings are included (
Profiles, , Edit Profile
Y E S
Note! The phone must be switched on and the automatic activation must be on
for the phone to switch profile automatically when connected to an accessory.
Tip! If you have several desktop chargers, they can each be added to a profile
or they can all be added to the same profile.
Portable Handsfree
When you connect a specific Ericsson Portable Handsfree to the T28, the
Port H-free profile is set automatically. This means that all profile settings
are set to the values specified for the Port H-free profile. See "The Profile
Concept" on page 88.
Tip! If you do not want your phone to switch profile automatically when you
connect it to the Portable Handsfree, you need to turn the Auto activation off.
To do this, manually select the 'Port H-free' profile, and set the Auto
activation to off.
Using the Portable Handsfree
To answer an incoming call
• When the phone rings, press the button on your Portable Handsfree once.
Tip! You can also answer a call by using your voice. See "Voice Answering"
on page 78.
To end a call
• Press the button on your Portable Handsfree once.
If the Call Waiting service is on, see "The Call Waiting Service" on page 65,
you can answer a second call by pressing the button on your Portable
Handsfree.
.
Y E S
appears. Press
appears to confirm your choice.
, ). See "Changing the profile settings" on page 89.
Y E S
Y E S
.
Y E S
Settings ,
Y E S
Accessories
to
,
93