Ericsson T28s User Manual page 79

Instead of pressing and holding
hold the volume key when the flip is open. A third alternative is to initiate
voice dialling by just opening the flip, but then Start on Flip must be on.
1.
2.
When Start on Flip is on, an icon appears in standby.
When connected to a portable or vehicle handsfree unit, you can answer or
reject incoming calls by using your voice.
Before you can use voice answering, you need to turn on the voice answering
function and record your voice commands.
1.
2.
3.
4.
5.
Note!
•
•
Note!
on page 93 and "Vehicle Handsfree" on page 94.
78 Voice Control
To turn on Start on flip
Scroll to Settings ,
Y E S
Select On .
Voice Answering
To turn on Voice Answering
Scroll to ,
Settings
Y E S
Select .
On
You now have to train your phone to recognize your voice answering
commands.
Press to continue.
Y E S
Follow the instructions in the phone display, i.e. say the word Answer and
press to save your recording. (Use the microphone of the Handsfree
Y E S
unit.) If the recording was not OK, repeat step 3.
Say the word Busy and press
If you prefer, you can use other words instead of 'Answer' and 'Busy'.
To answer an incoming call using your voice
When the phone rings, say the word Answer.
The word Answer is played back to you and the call will be connected.
To reject an incoming call
When the phone rings, say the word Busy.
The word Busy is played back to you, and the call is rejected, i.e. the caller
hears a busy tone.
For more information about handsfree units, see "Portable Handsfree"
, as in step 1 above, you can slide and
Y E S
, Voice Control , , Start on Flip
Y E S
, , ,
Handsfree Voice Answer
Y E S
to save your recordings.
Y E S
, .
Y E S
, .
Y E S