Ericsson T28s User Manual page 15

For more information, see "Using the Call List" on page 35.
Automatic Re-Dialling
If the connection failed when you first called and the display shows
User busy
you can re-dial the number by pressing
Retry?
re-dials (up to 10 times)
•
•
Note!
signal.
Automatic re-dialling is not available for fax and data calls.
1.
2.
3.
1.
2.
The international emergency number 112 can normally be used in any country,
with or without a SIM card inserted, if a GSM network is within range.
Note!
some cases that the PIN code has been entered as well.
Some networks may not use the international emergency number 112.
When you receive a call, the phone rings and the display shows Answer?
If your subscription includes the Calling Line Identification (CLI) service and
the caller's network sends the number, you see the caller's number in the
display. If the caller's number and name are stored in the phone book, the
caller's name is also shown.
If the incoming call is a restricted number, the display shows Withheld. If the
incoming call is a number without any CLI service, Unknown is shown.
14 Making and Receiving Calls
until the call is answered. When the call is successfully connected, you
hear a ring signal.
until you press a key or receive a call.
You do not need to take the phone to your ear until you hear the ring
Making International Calls
Press and hold the 0 key until a + sign appears.
The + replaces the international prefix number of the country from which
you are calling.
Enter the country code, area code (without the leading zero) and phone
number.
Press .
Y E S
Making Emergency Calls
Enter 112 (the international emergency number).
Press .
Y E S
Some network operators may require that a SIM card is inserted, and in
Receiving a Call
. Your phone automatically
Y E S
Retry? ,