Menu Settings; Camera Menu; Exposure; Stabilizer - JVC GR-SXM250 Instructions Manual

MENU SETTINGS
1 Set the Power Switch I_ to "[]" while pressing
down the Lock Button _) located on the switch.
2 Press the MENU Wheel O in. The Menu
Screen appears. Rotate the MENU Wheel O to
select the desired function.
• To go from CAMERA MENU to SYSTEM MENU,
rotate the MENU Wheel O to select "I_TO
SYSTEM MENU" and press it. SYSTEM MENU is
composed of 2 pages. To go to the next page,
rotate the MENU Wheel O to select "1_ NEXT"
and press it.
• To return to CAMERA MENU from page 2 of
SYSTEM MENU, rotate the MENU Wheel O to
select "I_TO CAMERA MENU" and press it.
_RETURN
4!-
8 Y 8 T E M M E N U
I
_f{e;x I
D_ ZOOM 50x
S. LX NORMAL
WIDE OFF
S-VHS ON
TAPE LENGTH T30
DISPLAY FULL
DATE/TIME DISP.
"RETUR
3 Press the MENU Wheel 0 in to display the
Setting Menu and rotate it to select the desired
setting.
4 Press the MENU Wheel 0 in. The Menu
Screen reappears with the highlight bar on
"I_RETURN". Press the MENU Wheel 0 in. The
normal screen reappears.
CAMERA MENU
EXPOSURE;
Manual exposure adjustment is recommended in
the following situations:
• When shooting using reverse lighting or when the
background is too bright.
• When shooting on a reflective natural background
such as at the beach or when skiing.
• When the background is overly dark or the
subject light.
1) Rotate the MENU Wheel 0 to select
"MANUAL", then press it,
2) To brighten the image, rotate the MENU Wheel
0 downward.
To darken the image, rotate the MENU Wheel
0 upward.
The exposure control level increases /
decreases (maximum +06).
_TABILIZER;
The Picture Stabilizer compensates for unstable
images caused by camera-shake, particularly at
high magnification.
ON : The Picture Stabilizer is activated.
L_ _ appears.
OFF : The Picture Stabilizer is disactivated.
_,_ _ disappears.
• Accurate stabilization may not be possible in
certain conditions including excessive hand
shake.
• L_,_ _ appears blinking if the Stabilizer cannot be
used.