Nikon COOLPIX L100 User Manual page 114

_ Vibration reduction
Press the MENU button -') V (Setup menu) (_ 92) -') _,_ Vibration reduction
Specify the vibration reduction setting for shooting still pictures. Vibration
reduction effectively corrects blur that commonly occurs when shooting with
zooming or at slow shutter speeds.
Turn vibration reduction off when using a tripod to stabilize the camera during
shooting.
on (default setting)
Vibration reduction is enabled.
Off
Vibration reduction is not enabled.
The vibration reduction setting can be confirmed on the monitor during shooting
(When it is set to Off, nothing is displayed) (_ 21).
oo
r_
7_-
o_
c
102
Notes on Vibration reduction
• Vibration reduction may take a few seconds to activate after the power is turned on, or the camera
enters shooting mode from playback mode. Wait until the display stabilizes before shooting.
• Due to characteristics of the vibration reduction function, images displayed on the camera's
monitor immediately after shooting may appear blurry.
• Vibration reduction may be unable to completely eliminate the effects of camera shaking in some
situations,
[] Using Vibration Reduction with Movies
When recording movies, electronic vibration reduction is used automatically to reduce the effects of
camera shake.