Table of Contents
Advertisement
Features
That Can Be Set Using the Multi
Selector
Using the Flash (Flash Modes)
You can shoot
pictures
with
a flash by raising tile flash. You can set a flash mode
that suits the shooting
conditions.
1
Press the 9 (flash
pop-up)
button
to raise the
flash.
• When the flash is lowered, flash operation is disabled
and _) is displayed.
2
Press •
(9 flash
mode)
on the
multi
selector.
_A_
3
Use the
multi
selector
to select
the
desired
mode
and press
the
_)
button.
• See "Available Flash Modes" (1_]57) for more
information.
• If the _) button
is not pressed within a few seconds,
the selection will be canceled.
_ o
• When _tAIITn (auto) is applied, _
is only displayed for
a few seconds even if monitor indicators (_9)
are
turned on.
4
Frame
the
subject
and take
a picture,
• The flash lamp indicates the status of the flash when
the shutter-release button is pressed halfway.
- On:
The flash will fire when you press the
shutter-release button all the way.
- Flashing: The flash is charging.The
camera cannot
take pictures.
- Off:
The flash will not fire when a picture is
taken.
• If the battery is low, the monitor will be turned off while the flash is charging.
56
Hide quick links:
Advertisement
Chapters
Table of Contents
