Clean At Startup/Shutdown - Nikon D5000 User Manual

II "Cleanat Startup/$hutdown"
Select Clean at startup/shutdown.
Display the Clean image sensor menu as
described in Step 2 on the previous page.
Highlight Clean at startup/shutdown and
press I_.
Select an option.
Highlight one of the following options and
press _).
2
Description
The image sensor is automatically cleaned each time the
L_ON Clean at startup camera is turned on.
Clean at The image sensor is automatically cleaned during shutdown
_OFF
shutdown each time the camera is turned off.
_oo_ Cleanat startup The image sensor is cleaned automatically at startup and at
& shutdown shutdown.
@ Cleaning off Automatic image sensor cleaning off.
[I_ Image Sensor Cleaning
Using camera controls interrupts image sensor cleaning. Image sensor cleaning may not be
3erformed at startup if the flash is on.
Cleaning is performed by vibrating the image sensor. If dust can not be fully removed using
the options in the Clean image sensor menu, clean the image sensor manually (_ 208) or
consult a Nikon-authorized service representative.
If image sensor cleaning is performed several times in succession, image sensor cleaning
may be temporarily disabled to protect the camera's internal circuitry. Cleaning can be
3erformed again after a short wait.
207