Nikon D3200 Reference Manual page 110

4
Select Choose start/end point.
Highlight Choose start/end point and press
@.
The dialog shown at right will be displayed;
choose whether the current frame will be
the starting or end point of the copy and
press _).
5
6
Delete frames.
If the desired frame is not currently
displayed, press • or I_ to advance or
rewind (to skip to 10 s ahead or back, rotate
the command dial). To switch the current
selection from start point (_!)to end point (i)
or vice versa, press _:[ (o-n).
Once you have selected the start point and/
or end point, press A. All frames before the
selected start point and after the selected
end point will be removed from the copy.
_:L(_.n) button
Save the copy.
Highlight one of the following and press _):
• Saveas newfile: Save the copy to a new file.
• Overwriteexistingfile: Replace the original
movie file with the edited copy.
• Cancel: Return to Step 5.
• Preview: Preview the copy.
Except in the photo information "image only" page (_ 98), edited copies are
indicated by a _ icon in full-frame playback.
94