Af Mode]; Esp/[_] - Olympus TG-810 Instruction Manual

Brightening the subject against
backlight [Shadow A djust]
iiiiliii_iiiiiii_il _ii_i!_iiiii_i!_ii!_iiH1i_i_iii_`_`i_`iiiiiiiiiiiiiiiiiiiiiiiiiiiii_`i_`_`_`_iii_iiii_`_`_`i
_to Automatically On when a compatible
................ shooting mode is selected.
Off The effect is not applied.
Shoot with automatic adjustment to
On brighten an area that has become
darker.
_ When set to (Auto) or [On], [ESP/I_q] (p. 41) is
automatically fixed to [ESP].
Selecting the focusing area [AF Mode]
To focus on a moving subject
continuously (AF Tracking)
i" Hold the camera to align the AF target mark on the
subject and press the _) button.
(2_ When the camera recognizes the subject, the AF
target mark automatically tracks the subject movement
to focus on it continuously.
3 To cancel the tracking, press the _) button.
_ Depending on the subjects or the shooting conditions,
the camera may be unable to lock the focus or fail to
track the subject movement.
_ When the camera fails to track the subject movement,
the AF target mark changes to red.
Selecting the method for measuring the
brightness [ESP/_]
.................................... ......... !) _ E#el_ ......................
The camera focuses automatically.
Shoots to obtain a balanced
brightness over the entire screen
_ (Meters the brightness at the center
and surrounding areas of the screen
separately).
Shoots the subject at the center
during backlighting (Meters the
(_ (spot) brightness at the center of the
screen).
(If a face is detected, it is shown by
a white frame _;when the shutter
_ e/JE_ button is pressed halfway and the
.................................. camera focuses, the frame turns to
green "2.If no face is detected, the
camera chooses a subject in the
frame and focuses automatically.)
The camera focuses on the subject
Spot located within the AF target mark.
The camera tracks the subject
AF Tracking movement automatically to focus on
it continuously.
*_ For some subjects, the frame may not appear or may
take some time to appear.
.2 If the frame blinks in red, the camera cannot focus. Try
refocusing on the subject.
When set to [ESP], the center may appear dark when
shooting against strong backlighting.