Olympus TG-810 Instruction Manual page 33

q_ Press the shutter button to take the next shot.
(_ To combine only two pictures, press the _) button
before taking the third frame.
_5" Repeat steps "3 _ and f_ to take e third frame.
• After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
_1[_ To exit the panorama function without saving an
image, press the MENU button.
Taking pictures with [PC]
'i" Use /k V<_[:> to select the direction that the frames
are combined.
_.&' Press the shutter button to take the first frame, and
then compose the second shot.
Beforefirstshot
After first shot
• After the first shot, the area shown in white
reappears on the side of the display opposite the
pen direction. Frame subsequent photographs so
that they overlap with the image in the monitor.
Repeat Step (2) until the number of desired frames is
taken, end then press the _) button or MENU button
when finished.
_.t,_/Panorama shooting is possible for up to 10 frames.
_,_ Refer to the PC software help guide for details on
how to make panorama images.
Shooting 3D images (3_ mode)
In this mode, 3D images are shot for viewing on
3D-compatible display devices.
SP_
¢_J Images shot in 3D mode cannot be displayed in 3D
on this camera's monitor.
Set the shooting mode to 3D.
v ÷
Press V to go to the submenu.
Use <]D to select [Auto] or [Manual] and
then press the _) button to set.
After shooting the first frame, overlap
the subject with the image in the
_to monitor. The next frame is taken
automatically.
After shooting the first frame, move
the camera to overlap the subject
Manual with the image in the monitor. Then
manua y re ease the shutter.
EN