Table of Contents
Advertisement
•
To disconnect
USB cable safely
Select
the _
icon in task tray displayed
on the PC, and then click [Eject Panasonic
Camcorder].
• Depending
on your PC's settings,
this icon may not be displayed.
About the screen
indication
of the unit
• Do not disconnect
the USB cable, the battery
or the AC adaptor
while the access
lamp
is on or card access icon ( _
) appears on the unit screen.
• _/_
Do not disconnect
the USB cable, the battery or the AC adaptor
while
the access
lamp
is on or built-in
memory
access icon ( _=_ ) appears on the unit screen.
• If the screen does not change when the unit is operated
while
connected to a PC.
disconnect
the battery and/or AC adaptor,
wait approximately
1 minute,
reconnect
the
battery
and/or AC adaptor,
wait approximately
1 minute
again, and then turn the unit
back on. (Data may be destroyed
when above operation is performed
while accessing
the SD card or built-in
memory.)
•
Charging the battery by connecting it to different devices
When
using the battery,
if you turn off the unit and connect
it to a PC, Panasonic
Blu-ray disc
recorder
or Panasonic
DVD recorder,
the battery
will charge.
• When connecting
this unit to a PC for the first time, make sure to connect
this unit to
the PC with this unit turned
on.
• insert the USB cable securely
all the way. It will not operate
properly
if it is not inserted
all
the way.
• Do not use any other USB cables except
the supplied
one. (Operation
is not guaranteed
with any other USB cables.)
• Be sure to connect
the unit directly
to the PC, Blu-ray disc recorder
or DVD recorder.
• During
charging,
the status indicator
flashes.
• You cannot charge
when the status indicator
flashes
rapidly
or when
it does not light at all.
Charge
using the AC adaptor.
(-_ 21)
• It will take 2 or 3 times
longer to charge
compared
to when using the AC adaptor.
• If the status indicator
flashes
at a particularly
fast or slow rate, refer to page 111.
95
VQT3J95
Advertisement
Chapters
Table of Contents
