Vqt2L14 - Panasonic SDR-S50P Operating Instructions Manual
Sd video camera sd/hdd video camera
Hide thumbs
Also See for SDR-S50P:
- Operating instructions manual (132 pages) ,
- Service manual (65 pages)
Table of Contents
Advertisement
Connecting
to a PC
• Connect
this unit to the PC after the software
applications
are installed.
• Remove
the supplied
CD-ROM
from your PC.
O
USB cable (supplied)
1
Connect this unit to the AC
adaptor.
• It is possible
to use the unit connected
to
the PC with the batteries
only, but you will
not be able to write
data into the unit.
• Use the AC adapter
to free you from
worrying
about the battery
running
down.
2
Turn on the unit.
• This function
is available
in all modes.
• When
using the battery,
the LCD monitor
will be turned off after about 5 seconds.
Operating
the joystick
will cause the LCD
monitor
to turn on again.
3
Connect this unit to a PC.
• Insert the USB connectors
as far as they
will go.
• Do not use any other USB cables
except
the supplied
one. (Operation
is not
guaranteed
with any other USB cables.)
• The Smart wizard
screen
is automatically
displayed
when VideoCam
Suite 3.0 is
installed.
• This unit is automatically
recognized
as an
external
drive of the PC. (-) 96)
• A USB function
selection
screen will be
displayed
if VideoCam
Suite 3.0 has not
been installed.
Use the joystick
to select
[PC], then press the center
of the
joystick.When
you select an option other
than [PC], reconnect
the USB cable.
94
VQT2L14
When Windows
is used as the PC
operating
system,
a message
prompting
to format
may display
when a SDXC card
is read. (Please
be aware that if a media is
formatted,
then all the data recorded
on
the media will be erased.)
http://panasonic.net/avc/sdcard/
i nformation/SDXC.html
• When the unit is connected
to a PC, its
power
cannot
be turned
off.
Disconnect
the USB cable, before
turning
this unit off.
• Do not disconnect
the USB cable or the
AC adaptor
while the access
lamp is on or
card access
icon ( _
) appears
on the
unit screen.
•
[
SDR-T55
}/I
SDR-T50
j
Do not disconnect
the USB cable or the
AC adaptor
while the access
lamp is on or
built-in
memory
access
icon ( ,4-:[]E )
appears
on the unit screen.
o_
Do not disconnect
the USB cable or the
AC adaptor
while the HDD access
lamp is
on or HDD access
icon (_,_)
appears
on
the unit screen.
• When performing reading/writing
between a
PC and an SD card, be aware that some SD
card slots built into PCs and some SD card
readers are not compatible with the SDHC
memory card or SDXC memory card.
Advertisement
Table of Contents
