Panasonic SDR-S50P Operating Instructions Manual page 34

Adjusting LCD monitor
* It is not displayed in the Manual Mode or
• These settings will not affect the images
actually recorded.
• Adjusting the brightness and
color level of the LCD monitor
It adjusts brightness and color density on the
LCD monitor.
Select the menu. (-_ 27)
I [SETUP] _ [LCD SET] ]
1
use the joystick to select the
item, then press the center of
the joystick.
[BRIGHTNESS]:
Brightness of the LCD monitor
[COLOR]:
Color level of the LCD monitor
• Select _ and press the center of the
joystick to return to the previous screen.
2
Make adjustments
in the playback mode.
If you use the AC adaptor, the F__
indication appears and the screen
becomes brighter automatically when the
power is turned on.
• Close the setting by pressing the MENU
button.
• Power LCD
This makes it easier to view the LCD monitor
in bright places including outdoors.
Select the menu. (-_ 27)
I [SETUP] _ [POWER LCD] ]
F_: Makes even brighter/ _: Makes
brighter / _: No setting (normal) / F_:
Makes darker / A_: Auto*
• The recordable time using the battery will
become shorter when you use this unit
with the LCD monitor lit up.
_ Change the mode to
Rotate the LCD monitor towards
the lens side.
The image is horizontally flipped as if you
see a mirror image. (However the image
recorded is the same as a normal
recording.)
When the LCD monitor is rotated towards
the lens side, the icon will not be displayed
even if you press the joystick.
Only some indications will appear on the
screen. When _ appears, return the
direction of the LCD monitor to normal
position and check the warning/alarm
indication. (-) 103)
34
VQT2L14