[] Dividing A Scene To Partially; Vqt2L14 - Panasonic SDR-S50P Operating Instructions Manual

Dividing a scene to
partially delete
This divides the recorded scenes in two and deletes the front half or back half.
( SDR-T55 }/f SDR-T50 J
4_ Change the mode to [], and switch play mode selection to [VIDEO/
Built-inMemory] (-> 62)
_ Change the mode to [_[], and switch play mode selection to [VIDEO/HDD]
(-) 62)
1
Select the menu. (-) 27)
I [EDIT SCENE] _ [SPLIT&DELETE]
2
Select the scene to be divided,
then press the joystick.
3 When you reach the point where you
want to divide the scene
Select [ \_"_] with the joystick.
]
5 Select [YES], then press the
joystick to play back the part to
be deleted.
• When youstop the playback, the
confirmation message appears.
• When [NO] is selected, the confirmation
message appears.
Proceed to step 6.
6 Select [YES], then press the
joystick.
• Move the joystick left or right to fast
forward/rewind playback.
• Using slow-motion playback or frame-by-
frame playback makes it easy to search
for the point where you want to divide the
scene. (-> 64)
4
Select the half that you want to
delete and press the joystick.
@
To continue dividing and deleting
other scenes
Repeat steps 2 to 6.
To complete editing
Press the MENU button.
• It is impossible to divide and delete
scenes with a short recording time. The
length of the remaining scenes must be
3 seconds or longer.
• It is impossible to set the dividing point at
the beginning or the end of the scene.
• When a scene that was divided and
deleted using the SPLIT&DELETE
function is copied to a disc using the DVD
burner or the supplied software and
played back on another device, a
maximum of about 1 second of the
deleted part may be played back.
• The actual division may slightly slip off the
previously designated dividing point.
72
VQT2L14