Adjusting The Feeder Presure; Confirmation Of Separation Spring - Panasonic KX-F900 Service Manual

2. ADJUSTING THE FEEDER PRESSURE
I KX-F900 J
If misfeeding of document, such a multiple feeding or no feeding, occurs frequently, try to adjust the feeder pressure by
following steps below.
.--Lever
(1) Open the front lid by pressing the front lid open.
(2) Shift the position of the lever by using an instrument
with a pointed end, like a clip or ball-point pen.
Position A: Select this when documents do not feed.
Position B: Standard position (pre-selected)
Position C: Select this when documents multiplefeed.
(3) Close the front lid by gently pressing down on both ends.
3. CONFIRMATION OF SEPARATION SPRING
Front lid open
button
SPRING HEIGHT TOOL
(PFZZ2F780M)
Fig. 1
NO TOUCH
SEPARATION SPRING
1. Open the operation grille.
2. Check the highest level of the separation spring with the
spring height tool (PFZZ2F780M). Please make sure that
the separation spring does not touch the tool during this
operation. (Both right and left) (See Fig. 1).
3. Check the lowest level of the separation spring with the
opposite side of the spring height tool. Please make sure
that the separation spring touches the tool during this
operation. (Both right and left) (See Fig. 2).
0
t,..
c
o)
.-I
m
z
SPRING HEIGHT TOOL
(PFZZ2F780M)
Fig. 2
TOUCH
SEPARATION SPRING
-101 -