Adjustments; Table Of Test Equipment And Tools; Adjusting The Feeder Pressure; Confirming The Separation Spring - Panasonic KX-FP121AL Service Manual

KX-FP121AL / KX-FM131AL

3 ADJUSTMENTS

3.1.

TABLE OF TEST EQUIPMENT AND TOOLS

3.2.

ADJUSTING THE FEEDER PRESSURE

If misfeeding of a document such as multiple feeding or no feeding occurs frequently, try to adjust the feeder pressure by following
the steps below.
1. Slide the cover open lever forwards to open the front cover.
2. Shift the position of the lever by using an instrument with a pointed end like a clip or a ball-point pen.
Position A: Select this position when documents are not fed.
Position B: Standard position (pre-selected)
Position C: Select this position when documents are multiple-fed.
3. Close the front cover securely by pushing down on both ends.
3.3.

CONFIRMING THE SEPARATION SPRING

Note:
Be careful not to bend the separation spring.
No. Test Equipment and Jig Name
1 Oscilloscope
2 Extension Cord
Jig No.
--------
PQZZ2K12Z, PQZZ8K18Z
Fig. 1
122