Jenn-Air JGR8895BDS Installation Instructions Manual page 12

3. Using a Phillips screwdriver, remove and set aside the 2 oven
bake burner cover screws located at the front of the oven.
A
B
A. Bake burner cover
B. Bake burner cover screws
4. Lift up and remove oven bake burner cover.
5. Unscrew 2 wing nuts and remove oven baffle.
A
A. Oven baffle
B. Wing nuts
6. Remove the 2 oven bake burner screws and set aside.
7. Gently set the bake burner to the side.
A. Igniter and wires
B. Bake burner screws
12
8. Unscrew and remove the cover over the orifice.
9. Turn the Number .0723 Natural gas orifice hood
counterclockwise to remove.
B
10. Install the Number .047 LP gas orifice hood, turning it
clockwise 4 or 5 turns. Do not overtighten.
A
B
A. Orifice cover
A. Number .0723 Natural gas orifice hood
A. Number .047 LP gas orifice hood
A
A
A