Sony Handycam HDR-PJ600 Operating Manual page 24

To turn offthe power
Close the LCD screen or press the POWER button (p. 15).
To adjust the angle of the LCD panel
First open the LCD panel 90 degrees to the
camcorder ((!)), and then adjust the angle
(®).
(_) 90 degrees
(_) 180 degrees (max.) (_) 90 degrees to thecamcorder
To turn offthe beep sound
Select_---+ [Setup]---+[_ GeneralSettings]---+[Beep] ---+[Off].
* The recording date, time and condition, and coordinates (HDR CX260V/CX580V/PJ260V/PJ580V/
PJ600V/XR260V) are recorded automatically on the recording media. They are not displayed during
recording. However, you can check them as [Data Code] during playback. To display them, select
-+ [Setup] -+ [_ Playback Settings] --+ [Data Code] --+ [Date/Time].
* Once the clock is set, the clock time is automatically adjusted with [Auto Clock ADJ ] and [Auto Area
ADJ] set to [On]. The clock may not be adjusted to the correct time automatically, depending on the
country/region selected for your camcorder. In this case, set [Auto Clock ADJ ] and [Auto Area ADJ] to
[Off] (HDR CX260V/CX580V/P J260V/PJ580V/PJ600V/XR260V).
(W
[Power On By LCD] (p. 69)
To set the date and time again: [Date & Time Setting] (p. 69)
To calibrate the touch panel: [Calibration] (p. 82)