Advertisement
2.
Assembly of the Upper & Lower
Channels, to Cabinet.
"L" Shaped Top Channel; Install the "L"
shaped channel to the top of the cabinet as
shown in Fig. 8 using four (4) 1/4" screws°
"U" Shaped Bottom Channel: install the "U"
shaped channel to the bottom of the cabinet as
shown in Fig, 8 using four (,1) I14" screws.
NOTE; Some models may already have the
bottom channel factory installed,
2a. Assembly of the Side Curtains to
Cabinet.
Slide the shutters inlo the lop end bottom
channels as shown in Fig. 9.The shutlers are
identified (on frame) as left& right. Attach the
shulters to the cab}net using four 1/4" screws on
each s}de.
3.
Installation of Mounting Brackets and
First Sealing Strip
SPECIAL NOTE: Window applications come tn
a variety of different styles, Therefore, It may
be necessary to modify or improvise your
particular fnstalfatlon,
3a, Assemble the leveeingscrew bracket to the
bracket assembty as shown in Rg,_0, using
four 1/4" screws provlded_ Inslal] the leveling
screws into each of the leveling screw
brackets.. (this will require the use of an
adjustable wrench)
3b_ Measure the inside window sill length and find
the center as shown In Fig. 11. From this ltne,
measure 8-118" on each side and mark these
points, Align the V-slot in each bracketon these
marks end mount to the sill using four 3/4"
screws provided. Brackets shoufd be
perpendicular to the inside window sill,wilh step
in bracket tight against the sill.. See Figs12.
3Co Adjust the leveling screws until the brackets lilt
no more than 3/16" downward to the outside,
Do net atlowthe brackets to slant inward as
condensation could possiblyddp on interior
walls and Iloors. See Fig. I2
3do Cut the 1st foam sealing strip to fit the
underside of the bottom window sash. Remove
the peel-off backing on the foam end attach it Io
the sash° See Fig. t3_
1/4' Screw
"L" Shaped
Channel
Channels
"U" Shaped
Chztnne!
Fig, 8
Shutter Frame
Fig,9
LeveJlng S_ew Stacker
Flg, 10
Advertisement
