Advertisement
ON/OFF SWITCH AND VARIABLE SPEED CONTROL (Fig. 3}
Your reciprocating
saw is
equipped
with a trigger switch
to turn the saw on and off and
to control the speed.
1.
2.
3.
To start the saw, squeeze
the trigger switch.
To stop the saw, release the
trigger switch and allow it to
return to the "OFF" position.
To vary the speed, simply
increase or decrease the
pressure on the trigger
switch.
The more tightly the
trigger switch
is squeezed,
the higher the speed.
LED WORKMGHT (Fig. 4)
This LED Worklight
is located
on the front of the saw and
provides
additional
lighting on
the surface of the workpiece
for operation
in lower-light
areas. The worklight
will turn on
when plugged
in. The worklight
will turn off when the saw is
unplugged.
Fig. 3
Fig. 4
LED
INSTALLING
SAW
BLADE (Fig. 5}
1.
Unplug the saw.
2.
While rotating the sleeve
of the clamp counter-
clockwise,
insert the saw
blade into the blade clamp
as far as possible,
then
release the sleeve; the
blade will lock in place
automatically.
Fig. 5
i i_]i
17175
Manual_Revised_08
0724
Page 12
Advertisement
