Craftsman 917.377682 Owner's Manual page 12

MAINTENANCE SCHEDULE /_:_°_o_%y
AS YOU COMPLETE S
REGO ,RSERV,CE E2V'C
Lubrication I_
CheckTires I_
Check DriveWheels
{Power-PropelledMowers) It/'
Check for Loose Fasteners I_ t/
Clean/Inspect Grass Catcher
(If Equipped) _ I_ I_'
Clean Lawn Mower ll/
W
E
R
Clean Under Drive Cover
(Power-Propelled Mowers)
Check drive belt/pulleys
(Power-PropelledMowers)
Check/Sharpen/Replace Blade
Clean Battery/Recharge
IElectdc Start MowersI
I Check Engine Oil Level I_s
Change Engine Oil
_1,2
GI Clean Air Filter I_ 2
Inspect Muffler I/
N Replace Spark Plug I_
Replace Air Filter Paper Cartridge kS2
1 - Change more oftenwhen operatingundera heavy loador In high ambient temperatures.
2 - Service more oftenwhen operatingin dirty or dustyconditions.
S - Replaceblades moreoften when mowingin sandy soil.
GENERAL RECOMMENDATIONS
The warranty on this lawn mower does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator must
maintain unit as instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your unit.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
• At least once a year, replace the spark
plug, clean or replace air filter element
and check blade for wear. A new spark
plug and clean/new air filter element
assure proper air-fuel mixture and help
your engine run better and last longer.
• Follow the maintenance schedule in this
manual.
BEFORE EACH USE
• Check engine oil level.
• Check for loose fasteners.
LUBRICATION
Keep unit well lubricated
(See "LUBRICATION CHART').
4 - Charge 48 hoursat end of season.
5 - And after each 5 hoursof use.
LUBRICATION CHART
I
I
I
_ (_ Brake spring
[ _ bracket
\ _ Mulcher
"-- _ door hinge
pin
(_ Rear
(_ Handle bracket mounting pins door hinge
_ Spray lubricant
See "ENGINE" in Maintenance section.
IMPORTANT: Do not oil or grease plastic
wheel bearings. Viscous lubricants will
attract dust and dirt that will shorten the life of
the self-lubricating bearings. If you feet they
must be lubricated, use only a dry, powdered
2graphite type lubricant sparingly.
1