Charger Assembly - Craftsman 973.114250 Operator's Manual

DRILL-DRIVER
Chuck ..................................................................... 318 inr Keytess
Maximum Torque .................................................... !00 inolbS
Switch ............................................................ Variable Speed
Clutch .................................................................... 24 positions
Motor ............................................................... DC, 15,6 Volt
No Load Speed .................................................... 0 - 6001rain
CHARGER ASSEMBLY
Charger input .......................... 120 volts, 60 Hz, AC oniy
Charger Voltage ........................................................ 15,6 Volt
Charge Rate ............................................................3 - 6 Hours
INSTRUCTIONS
We have shipped the dril-driverl completely assembled,
II Carefully remove the tool and the accessories from
the box. Make sure that all items listed in the packing
list are included,
Ill Inspect the tool carefully to be sure no breakage or
damage occurred during shipping,
I Do not discard the packing material until you have
carefully inspected and satisfac'_orily operated the
tool.
Ill If any parts are damaged or missing, please call
1-800-932-3188 for assistance,
PACKING LIST
Drill.driver
Battery (2)
Charger
Carrying Case
Operator's Manual
_I, WARNING: If any parts are missing, do not
operate your too] until the missing parts are
replaced, Failure to do so could resutt {n serious
personal injury.