Advertisement
Quick Links
Owner's Manual
ICRI:IFTSMRN I
318 in., 18 VOLTS CORDLESS
DRILL-DRIVER
Variable Speed / Reversible
Model No.
973.113060
Save this manual
for
future reference
CAUTION:
Read and follow all
Safety Rules and Operating Instructions
before first use of this product.
Customer
Help Line: 1-800-932-3188
Sears,
Roebuck
and Co.,
Hoffman
Estates,
IL 60179
USA
Visit the Craftsman
web page: www.sears.com/craftsman
972000-843
2-01
• Safety
• Features
• Operation
• Maintenance
• Parts List
®
Advertisement
Related Manuals for Craftsman 973.113060
Summary of Contents for Craftsman 973.113060
- Page 1 Read and follow all • Operation Safety Rules and Operating Instructions • Maintenance before first use of this product. • Parts List Customer Help Line: 1-800-932-3188 ® Sears, Roebuck and Co., Hoffman Estates, IL 60179 Visit the Craftsman web page: www.sears.com/craftsman 972000-843 2-01...
- Page 2 TABLE OF CONTENTS • General Safety Rules ..............................• Specific Safety Rules/Symbols ..........................• Features ..................................• Operation .................................. 8-13 • Maintenance ................................. • Accessories .................................. • Warranty ..................................• Exploded View And Repair Parts List .......................... • Parts Ordering / Service ............................... Personal Safety WARNING:...
- Page 3 Tool Use and Care Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools, with sharp • Use clamps or other practical way to secure and cutting edges are less likely to bind and are easier to support the workpiece to a stable platform.
- Page 4 Important Safety Instructions For Charger • Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any Save these instructions. This manual contains way; take it to a qualified serviceman. Following important safety and operating instructions for this rule will reduce the risk of electric shock, fire, or charger item number 9-11059 (981831-002).
- Page 5 SYMBOLS SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Amperes Current Hertz Frequency (cycles per second) Minutes Time "_ Alternating Current Type or a characteristic of current Direct Current Type or a characteristic of current No Load Speed Rotational speed, at no load .../min Revolutions or Reciprocation Per Minute...
- Page 6 KNOW YOUR DRILL-DRIVER FORWARD/REVERSE SELECTOR See Figure 1. (DIRECTION OF ROTATION SELECTOR) Before attempting to use your drill-driver, familiarize Your drill-driver has a forward/reverse selector located yourself with all operating features and safety above the switch trigger. requirements. WRIST STRAP WARNING: Carefully read through this entire owner's A wrist strap is provided to reduce the chances of dropping...
- Page 7 TWO-SPEED BIT STORAGE LEVEL BATTERYPACK GEARTRAIN (HI-LO) KEYLESSCHUCK DIRECTION OF YELLOWAND GREENLIGHTS ROTATIONSELECTOR INDICATESOFT STARTMODE (FORWARD_EVERSE) SWITCH GREENLIGHT"ON" TRIGGER INDICATESSLOW CHARGING MODEOR FULLYCHARGED 3 MODE WRIST STRAP CHARGER _;Z_ZZ_f___ SCREWDRIVERBITS Fig. 1 CHARGER See Figure 2. Your charger has a "key hole" hanging feature for convenient, space saving storage.
- Page 8 After normal usage, 1 hour of charging time is required WARNING: Always wear safety goggles or safety to be fully charged. A minimum charge time of 1-1/2 glasses with side shields when operating tools. hours is required to recharge a completely discharged Failure to do so could result in objects being thrown tool.
- Page 9 SWITCH TO INSTALL BATTERY PACK See Figure 3. • Lock switch trigger on your drill by placing the direction To turn your drill ON, depress the switch trigger. To turn it of rotation selector in center position. See Figure 6. OFF, release the switch trigger.
- Page 10 SWITCH LOCK KEYLESS CHUCK See Figure 6. See Figure 7. The switch trigger can be locked in the OFF position. This Your new drill has a keyless chuck. As the name implies, feature can be used to prevent the possibility of accidental you can hand tighten or release drill bits in the chuck jaws.
- Page 11 INSTALLING BITS REMOVING BITS See Figure 8. See Figure 8. Lock the switch trigger by placing the direction of • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 6. rotation selector in center position. See Figure 6. Open or close chuck jaws to a point where the open- •...
- Page 12 Note:Remember thetwo-speed f eature(HI-LO) w hen DRILLING settingtorque. T heamount o ftorque willvarydepending See Figure 13. on which speedsetting youhaveyourdrill-driver. Switch- ingtoLOspeed willincrease torque. S witching t o HI speed willdecrease torque. BIT STORAGE See Figure 11. When not in use, bits provided with your drill can be placed in the storage area located on the top of your drill as shown in figure 11.
-
Page 13: Chuck Removal
CHUCK REMOVAL • Insert hex key wrench in chuck and tighten chuck jaws securely. Tap sharply with a mallet in a counterclock- See Figures 14, 15, and 16. wise direction. This will loosen chuck on the spindle. It The chuck must be removed in order to use some can now be unscrewed by hand. - Page 14 Do not abuse power tools. Abusive practices can WARNING: When servicing, use only identical damage tool as well as workpiece. Craftsman replacement parts. Use of any ether part may create a hazard or cause product damage. Only the parts shown on parts list, page 17, are intended to be repaired or replaced by the customer.
- Page 15 Thefollowing recommended accessories a recurrently available atSearsRetail S tores. • 6-Pc.ExtraLength Magnite PowerBitSet • HighSpeed Bits(ForWoodor Metal)..3/4 i n. Max. • 30-Pc. P owerScrewdriver/Nutdriver SetandCase • Keyless Chuck(ItemNo.9-20988) • 17-Pc. P owerScrewdrivedNutdriver SetandCase WARNING: The use of attachments or accessories not listed might be hazardous. WARRANTY FULL ONE YEAR WARRANTY ON I:RaI=TSMI_N 3/8 in.
-
Page 17: Parts List
CRAFTSMAN 3/8 in. CORDLESS DRILL-DRIVER MODEL NO. 973.113060 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your 3/8 in. CORDLESS DRILL-DRIVER or when ordering repair parts. - Page 18 Get it fixed, at your home or ours! For repair of major brand appliances in your own home... no matter who made it, no matter who sold it! 1-800-4-MY-HOME sM Anytime, day or night (1-800-469-4663) www.sears,com To bring in products such as vacuums, lawn equipment and electronics for repair, call for the location of your nearest Sears Parts &...