Table of Contents
Advertisement
Quick Links
Owner's Manual
IERRFTSMRN'I
318 in., 16.8 VOLTS CORDLESS DRILL-DRIVER
Variable Speed / Reversible
Model No.
973.111401
Save this manual for
future reference
_, CAUTION:
Read and follow all
Safety Rules and Operating Instructions
before first use of this product.
Customer
Help Line: 1-800-932-3188
Sears,
Roebuck
and Co.,
Hoffman
Estates,
IL 60179
USA
Visit the Craftsman
web page: www.sears.com/craftsman
972000-820
1-01
• Safety
• Features
• Operation
• Maintenance
• Parts List
®
Advertisement
Table of Contents
Related Manuals for Craftsman 973.111401
Summary of Contents for Craftsman 973.111401
- Page 1 • Features Safety Rules and Operating Instructions before first use of this product. • Operation • Maintenance Customer Help Line: 1-800-932-3188 • Parts List ® Sears, Roebuck and Co., Hoffman Estates, IL 60179 Visit the Craftsman web page: www.sears.com/craftsman 972000-820 1-01...
-
Page 2: Full One Year Warranty
• Warranty ................................. Introduction and Product Specifications ......................• Rules For Safe Operation ........................... A. Important Safety Rules For Battery Tools ....................B. Important Safety Instructions For Charger ..................... • Accessories ..............................Features ................................. • Operation ..............................7-12 Maintenance ..............................•... - Page 3 The purpose of safety symbols Is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.
- Page 4 WHEN SERVICING USE ONLY IDENTICAL U DO NOT USE TOOL IF SWITCH DOES NOT CRAFTSMAN REPLACEMENT PARTS. TURN IT ON AND OFF. Have defective switches IMPORTANT SAFETY INSTRUCTIONS replaced by an authorized service center.
-
Page 5: Rules For Safe Operation
RULES FOR SAFE OPERATION (Continued) • An extension cord should not be used unless • Do not use charger outdoors. absolutely necessary. Use of improper extension • Disconnect charger from power supply when not in cord could result in a risk of fire and electric shock. use. - Page 6 The following recommended accessories are currently available at Sears Retail Stores. • 6-Pc. Extra Length Magnite Power Bit Set • High Speed Bits (For Wood or Metal)..3/4 in. Max. • 30-Pc. Power Screwdriver/Nutdriver Set and Case • Keyless Chuck (Item No. _-20988) •...
- Page 7 • When your battery pack becomes fully charged, the WARNING: Always wear safety goggles or red light will turn OFF and the green light will turn safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible •...
- Page 8 SWITCH TO INSTALL BATI'ERY PACK See Figure 2. • Lock switch trigger on your drill by placing the To turn your drill ON, depress the switch trigger. To direction of rotation selector in center position. See Figure 5. turn it OFF, release the switch trigger. •...
- Page 9 SWITCH LOCK See Figure 5. The switch trigger can be locked in the OFF position. This feature can be used to prevent the possibility of accidental starting when not in use. To lock switch trigger, place the direction of rotation selector in center position.
- Page 10 INSTALLING BITS REMOVING BITS See Figure 8. See Figure 8. Lock the switch trigger by placing the direction of Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 5. rotation selector in center position. See Figure 5. Open or close chuck jaws to a point where the Loosen the chuck jaws from drill bit.
- Page 11 DRILLING Note: Remember the two-speed feature (HI-LO) when setting torque. The amount of torque will vary depend- See Figure 13. ing on which speed setting you have your drill-driver. Switching to LO speed will increase torque. Switching to HI speed will decrease torque. BIT STORAGE See Figure 11.
- Page 12 CHUCK REMOVAL Insert hex key wrench in chuck and tighten chuck jaws securely. Tap sharply with a mallet in a See Figures 14, 15, and 16. counterclockwise direction. This will loosen chuck The chuck must be removed in order to use some on the spindle.
-
Page 13: For Recycling
Do not abuse power tools. Abusive practices can WARNING: When servicing, use only identical damage tool as well as workpiece. Craftsman replacement parts. Use of any other part may create a hazard or cause product Only the parts shown on parts list, page 15, are damage. -
Page 15: Parts List
CRAFTSMAN 318 In., 16.8 VOLTS CORDLESS DRILL-DRIVER - MODEL NO. 973.111401 ---, The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your 3/8 In., 16.8 VOLTS CORDLESS DRILL-DRIVER when ordering repair pads. - Page 16 For repair of major brand appliances in your own home... no matter who made it, no matter who sold it! 1-800-4-MY-HOM EsM Anytime, day or night (1-800-469-4663) www.sears.com To bring in products such as vacuums, lawn equipment and electronics for repair, call for the location of your nearest Sears Parts & Repair Center. 1-800-488-1222 Anytime, day or night...