GE Profile 25 Owner's Manual And Installation page 9

Table of Contents

Advertisement

Available languages

Available languages

GEAppliances.com
Not all features
are on all models.
Freezer
Baskets
To remove, push the basket all the WaLl t o
the back of the freezer. Lift up until the back
pins ore disengaged. Lift the entire basket
up and pull out.
Make sure you push the baskets all the way
back in before you close the door.
Slide-Out
Freezer Shelves
To remove, slide out to the stop position,
lift the front past the stop position and
slide out.
Make sure you push the shelves all the way
back in before you close the door.
Fixed
Freezer
Shelves
There are two tLlpes of fixed freezer shelves.
To remove this type of shelf:
Liftthe shelf up at the left side.
0
Bring the shelf out.
To remove this type of shelf:
Liftup the left side of the shelf and slide it
left into the center of the shelf supports.
Rotate the right side of the shelf up
and out of the shelf supports.
NOTEFORDISPENSER NODELS:In order to
take full advantage of the tilt-out ice bin, only
store items on the shelf below the ice bin that
are no toiler than the lowest point on the bin.
Door
Wine/Beverage
Rack
fan some models)
This rack holds up to 5 cans or one bottle
of wine.
The rock hangs from the sides
of the dairLl bin.
To remove:
EmptLlthe wine/beverage rack.
Holding the bottom of the dairLl bin,
lift the front straight up, then lift up
and out.
0
To detach the rack from the dairLl bin,
pull the rack's side wires out of the holes
on each side of the dairLl bin.
To replace:
Reattach the rack to the sides of the bin.
Engagethe back side of the bin in
the molded supports on the door.
Then push down on the front of
the bin. The bin will lock into place.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Profile 23Profile 26

Table of Contents