Deselecting Inputs
This function allows you to deselect unwanted signal input. See page
• When stack projecting, multi-screen projecting and so on, this function can be used to cancel the RS-232C control.
• Up to two input signals can be blocked for both Input 1, 2, 3 or Input 4, 5.
• For details on intended purpose, see pages
Selecting the Transmission Speed (RS-232C)
This menu allows you to adjust the transmission speed of the RS-232C connection by selecting the
baud rate. See page
• Make sure that both the projector and computer are set for the same baud rate. Refer to the computer's operation manual
for instructions for setting the baud rate.
59
and
65
for the procedure details.
44
.
66
for the procedure details.
44