Deselecting Inputs; Selecting The Transmission Speed (Rs-232C) - Sharp XG-P25XU Operation Manual

Deselecting Inputs

This function allows you to deselect unwanted signal input. See page
• When stack projecting, multi-screen projecting and so on, this function can be used to cancel the RS-232C control.
• Up to two input signals can be blocked for both Input 1, 2, 3 or Input 4, 5.
• For details on intended purpose, see pages

Selecting the Transmission Speed (RS-232C)

This menu allows you to adjust the transmission speed of the RS-232C connection by selecting the
baud rate. See page
• Make sure that both the projector and computer are set for the same baud rate. Refer to the computer's operation manual
for instructions for setting the baud rate.
E-53
XG-P25X/CD (E)-e 53
and
59 60
for the procedure details.
38
38
.
02.3.19, 7:11 PM
for the procedure details.