Sharp AR-PB8 Operation Manual page 30

SETTING THE NETWORK
DATA
NE MENU ITEM
1 2 3
28
5
ENTER
6
4
7
Press the ENTER key.
The display shows "On
seconds, you can set the address.
Press the Left or Right arrow key to
enter the address.
Enter the numerals in the underlined portions of
the display with the appropriate arrow key.
Pressing the right arrow key scrolls up through
the numerals. Pressing the left arrow key scrolls
down through the numerals. Hoiding down the
left or the right arrow key for more than 2
seconds scrolls quickly through the numerals.
Enter the leftmost digits.
key. The underline moves to the digits shown
in position 2 in the illustration.
Enter a numeral in position 2.
ENTER key. The underline moves to the digits
shown in position 3.
Enter a numeral in position 3.
ENTER key. The underline moves to the digits
shown in position 4.
Enter a numeral in position 4.
ENTER key.
Press the ITEM key.
You can now enter the subnet mask and default
gateway.
", and after about 2
*
Press the ENTER
Press the
Press the
Press the