Basic Operations; Sending Documents - Sharp FO-5600 Operation Manual

YF <P=001>
Transmittable documents
Your fax can transmit most standard office documents. Specific guidelines are as
follows:
Size and weight
The size and weight of documents which you can load in the document feeder depend
on whether you load one sheet at a time or several sheets at once.
One sheet at a time:
2
52 g/m 157 g/m
Several sheets at once:
2
52 g/m 80 g/m
Note:
The area of the document which is scanned by the fax is slightly smaller than the actual
document size. Any letters or graphics outside this area cannot be transmitted.
Scanning width:
Scanning length:
Note:
When sending a document wider than 226 mm, your fax will automatically reduce the
width of the image transmitted to 203 mm. If the document contains fine print or
graphics, the copy which the receiving party obtains may be difficult to read due to the
size reduction. This function is automatically disabled if the printing width of the
receiving machine is greater than or equal to the width of the document.
3

BASIC OPERATIONS

SENDING DOCUMENTS

2
128 mm
2
128 mm
216 mm for documents up to 226 mm wide.
Maximum of 256 mm for documents 226 mm to 280 mm
wide when reduced automatically (see following note).
The length of the sheet minus 4 mm from both the top and
bottom edges.
BASIC OPERATIONS
FO5600A-BOPS
148 mm
280 mm
148 mm
280 mm
432 mm
364 mm
3-1