Basic Operations - Sharp FO-2600 Operation Manual

Hide thumbs Also See for FO-2600:
Table of Contents

Advertisement

Your fax can transmit most standard office documents. Specific guidelines are as
follows:
Size and weight
The size and weight of documents which you can load in the document feeder depend
on whether you load one sheet at a time or several sheets at once.
One sheet
at a time:
52 g/m2
_
157 g/m2
128 mm
148 mm
4
b
216
mm
1.0 m
Several sheets
at once:
52 g/m*
v
128mm
'i_
80 g/m2
148
mm
*
b
356 mm
216 mm
Note:
The area of the document which is scanned by the fax is slightly smaller than the actual
document size. Any letters
or graphics
outside this area cannot be transmitted.
Scanning
width:
210 mm.
Scanning
length:
The length of the sheet minus 4 mm from both
the top and
bottom edges.
0 ther res tric Cons
Documents written in yellow, greenish yellow, or light blue ink cannot be transmitted,
as the scanner does not recognise these colours.
Ink, glue, and correcting fluid on documents must be dry before they are transmitted.
All clips, staples, and pins must be removed from documents before transmission. If
these are not removed, they may damage the fax.
Documents which are patched, taped, torn, smaller than the minimum size, carbon
backed, or easily smudged should be photocopied, and the copy used for
transmission.
BASIC OPERATIONS
3-1

Advertisement

Table of Contents
loading

Table of Contents