Removing A Document From The Feeder - Sharp FO-51 Operation Manual

Loading the Document
3
Adjust the resolution and/or contrast settings as explained in
Resolution and Contrast below, then dial the receiving machine as
explained on page 29.

Removing a document from the feeder

If you need to remove
a document from the
feeder, open the
operation panel.
Important!
Do not try to remove a document without first releasing it as explained below. This
may damage the feeder mechanism.
1
Grasp the finger hold and pull up to
open the operation panel.
2
Remove the document.
•
If you can not remove the document,
see Clearing a jammed document on
page 76.
3
Close the operation panel.
•
Press down on both front corners of the
panel to make sure it clicks into place.
26