Sharp DK-A1H Operation Manual page 25

Notes:
The same station name can be stored in different channels.
In a certain area or during certain time periods, the station names
may temporarily be different.
Notes for RDS operation
If any of the following events occur, it does not mean that the
unit is faulty:
"PS", "NO PS" and a station name appear alternately, and the unit
does not operate properly.
If a particular station is not broadcasting properly or a station is
conducting tests, the RDS reception function may not work
properly.
When you receive an RDS station whose signal is too weak,
information like the station name may not be displayed.
"NO PS", "NO PTY" or "NO RT" will flash for about 5 seconds, and
then the frequency will be displayed.
Notes for radio text:
The first 9 characters of the radio text will appear for 4 seconds
and then they will scroll across the display.
If you tune in to an RDS station which is not broadcasting any
radio text, "NO RT" will be displayed when you switch to the radio
text position.
To recall stations in memory
To specify programmed types and select stations (PTY search):
You can search a station by specifying the programme type (news,
sports, traffic programme, etc. ... see pages 19 - 20) from the stations
in memory.
1
Press the TUNER button on main unit or FUNCTION button
on remote control repeatedly to select the FM band.
2
Press the RDS PTY button on the remote control.
"SELECT" and "PTY TI" will appear alternately for about 6
seconds.
3
Within 6 seconds, press the
programme type.
Each time the button is pressed, the programme type will
appear. If the button is held down for more than 0.5 seconds,
the programme type will appear continuously.
4
Whilst the selected programme type is flashing (within 6
seconds), press the PTY button on remote control.
After the selected programme type has been lit for 2 seconds,
"SEARCH" will appear, and the search operation will start.
or button to select the
DK-A1H
DK-A1H(BK)
ENGLISH
E-18